Nortel BCM50 2.0 Configuration Manual page 192

192 Chapter 23 Telephony features
• At the telephone:
Press FEATURE *7.
1
Press a number from 1 to 9 (depending on your telephone).
2
Press HOLD to set your choice.
3
Select how you dial your calls
Digital telephones provide three methods for dialing calls:
• Standard dial: allows you to make a call by selecting a line and dialing the number. If you
have a prime line, it is selected automatically when you lift the handset, or press the Handsfree
button.
• Automatic dial: allows you to dial a number without selecting a line. Your Prime line is
selected when you start dialing a number. Your Prime line must be free to make a call.
• Pre-dial: allows you to enter a telephone number, check it, then change it before making the
call. The call does not dial until you select a line or line pool, or lift the handset. You can
pre-dial both external and internal numbers. However, you must select the correct type of line
(external or internal) for the type of number you have entered.
• Using the system:
(Note that not all telephones allow all three types of dialing).
Element Manager: Configuration > Telephony > Sets > All DNs > top panel - Capabilities
and Preferences > bottom panel - Preferences
• Using the telset interface:
Telset Admin: Terminals and Sets > User prefernces > dialing opt'ns
• At the telephone:
Press FEATURE *82.
1
Press # to select the mode.
2
Press HOLD to store the mode.
3
Choosing the language for the telephone display
• Using the system:
Element Manager: Configuration > Telephony > Sets > All DNs > top panel - Capabilities
and Preferences > bottom panel - Preferences
• Using the telset interface:
Telset Admin: Terminals and Sets > User prefernces > Language
NN40020-300 NN40020-300