Nortel BCM50 2.0 Configuration Manual page 212

212 Chapter 24 Feature configuration: Answering calls
Configuration one
If you want all incoming calls to auto-associate to SWCA assignments on the receiving
telephone:
a To auto-associate SWCA key to call, select Automatically - life of call.
b To include I/C calls when auto-associating, select the check box.
c
To invoke SWCA parking by Hold, select the check box.
d To include I/C calls when invoked by Hold, select the check box.
Configuration two
If you want incoming calls to auto-associate to SWCA assignments on the receiving
telephone, but you want calls on hold to remain on hold at the receiving telephone, unless the
user presses a SWCA button, or enters a SWCA code:
a To auto-associate SWCA key to call, select the Automatically - life of call.
b To include I/C calls when auto-associating, select the check box.
c
To invoke SWCA parking by Hold, clear the check box.
d Include I/C calls when invoked by Hold is not applicable in this configuration.
Configuration three
If you want external incoming calls to auto-associate to SWCA assignments on the receiving
telephone, but you want all intercom calls to require manual parking:
a To auto-associate SWCA key to call, select the Automatically - life of call.
b To include I/C calls when auto-associating, clear the check box.
c To invoke SWCA parking by Hold, select the check box.
d To include I/C calls when invoked by Hold, clear the check box.
Configuration four
If you want all calls to require the user to press a SWCA button, or enter a SWCA code:
a To auto-associate SWCA key to call, select either Manually- while parked or Manually -
life of call.
b To include I/C calls when auto-associating is not applicable in this configuration.
c To invoke SWCA parking by Hold, clear the check box.
d To include I/C calls when invoked by Hold is not applicable in this configuration.
3 Configure the SWCA keys to indicator memory buttons on the telephones.
Refer to "Programming memory buttons" on page 226
buttons at the telephone.
4 Label the buttons.
NN40020-300 NN40020-300
for details about programming memory