Nortel BCM50 2.0 Configuration Manual page 62

62 Chapter 6 DN records parameters
Table 17 describes the possible settings for telephone buttons.
Table 17 Button programming fields (Sheet 1 of 2)
Setting
Model
Button Number
(1-24)
Function
Value
Feature
Internal autodial
Digits
Feature
External autodial
Option
Feature
NN40020-300 NN40020-300
Values
7100
7208
7310/7316
7316E
7324
2004/2050
2002
2001
ISDN
Other
<1-XX>
Blank
Feature
Internal autodial
External autodial
<feature code>
<Internal DN>
<feature digits>
<dialing codes plus
dialout string>
<feature options>
Description
If you have not yet connected a telephone, choose the
model of the telephone. This creates a number of
defaults based on the telephone capabilities.
This setting reflects whatever you set on the main table.
This field is read-only if the telephone is already
attached or registered to the system.
• 7310 also refers to the cordless 7406 cordless digital
phones.
• 7316E indicates both a stand-alone7316E digital
phone and a 7316E digital phone connected to one
or more KIMs (Key Indicator Modules).
These telephones have their own set of DN records.
• ISDN refers to any ISDN equipment
This heading is used for the following types of devices:
• analog telephones
• Intl set (European only) is used for other types of
compatible telephones used in specific non-North
American markets, such as the 7000 digital phone.
Use the telephone buttons to choose the features you
want to program.
Blank means that nothing is programmed on the button.
Example: New KIM modules have all blank buttons
when they are first installed.
Choose the type of feature that you want to program on
the telephone buttons.
Blank means that nothing is programmed on the button.
Example: New KIM modules have all blank buttons
when they are first installed.
Use the arrow to choose the feature you want to
program on the button.
Enter the DN number for the internal telephone you want
the telephone to dial by pressing this button.
Includes digits for such features as system speed dial
codes.
Enter the complete dial sequence for the external call.
This sequence depends on what you chose for the route
in the Value field.
Includes settings such as page zone.