Nortel BCM50 2.0 Configuration Manual page 161

IP telephone 2002 button defaults
The 2002 has four memory buttons beside a display that provides soft labels for the buttons. This
telephone also has five other programmable buttons with no display.
Figure 52 2002 default button assignment
01
02
IP Phone 2002 models
There are two models of the IP Phone 2002, referred to as Phase 1 and Phase 2. The Phase 2
models have some features that are not available on the Phase 1 models. To determine the model
of your IP Phone, turn the IP Phone over and locate the label containing the product code (NT
code). The product code identifies the model of your IP Phone.
Table 52 IP Phone 2002 product codes
Product code
NTDU76xxxx
NTDU91xxxx
Where "xxxx" represents any valid character.
Chapter 21 Default memory button programming for telephones
05
06 07
09
08
Model
Phase 1
Phase 2
Table 51 2002 button defaults
03
04
2002 default button mapping
Btn #
01
02
03
04
05
06
07
08
09
PBX DID
Call Forward Line
XXX
Conference/Transfer
Intercom
Intercom
Blank
Voice mail login
Express Messaging
Service menu
Blank
Device Configuration Guide
161