Nortel BCM50 2.0 Configuration Manual page 39

Table 7 Button Programming Feature settings (Sheet 3 of 4)
Set command
(FEATURE Feature
<code>)
815 Call logs autobumping
818 Call charge indication
819 ONN blocking
82 Camp-on
83 Privacy control
84 Line redirection
85 Do not disturb
86 Background music
870 Service mode status
871 Ringing service
872 Restriction service
873 Routing Service
88 Voice call deny
897 MCID
*501 Language choice
*7 Contrast
904 CC agent login/log out
905 CC supervise
906 CC supervisor help
907 CC activity code
908 CC agent make Not
ready/ready
909 CC skillset status
980 Voice mail Leave
Message
981 Voice mail login
982 Voice mail operator
settings
984 Call forward to voice mail Forwards all calls to your voice mail.
Chapter 5 System features and feature codes
Description
Allows the user to select if the system will remove the oldest log item
manually when the log space fills.
Allows the user to view the charges for a call (available on DASS2 and
ETSI Euro trunks only).
Allows the user to block the call information from the telephone for an
outgoing call.
Allows the user to transfer and camp an external call on another
telephone in the system.
Allows the user to change the line privacy setting on the current call.
Allows the user to redirect a line on their telephone to an external
number.
Allows the user to block incoming calls from ringing on the telephone.
Allows the user to play music provided by a background music source
through the speaker on the telephone.
Allows the user to view the current service mode being used.
Allows the user to change the ringing service mode.
Allows the user to change the restriction service mode.
Allows the user to change the routing service mode.
Allows the user to deny other users from Voice Calling their set.
(Malicious Call Identification)
Allows the user to query the system for information about a call within 25
seconds after the user hangs up, but before the caller hangs up.
Provides a menu that allows you to choose the language for the display
prompts on the telephone.
Digital telephones only.
Sets the level of contrast for the telephone display.
Allows the user to log in or out of ACD.
Allows the CC supervisor to monitor CC agent calls.
Allows the CC agent to request help from a CC supervisor.
Allows the CC agent or supervisor to enter activity codes for reporting.
Allows the user to indicate ready or Not ready status on ACD.
Allows the user to view the status of queued calls on ACD.
Allows the user to log into voice mail box to leave a message.
Opens your mailbox to play your messages and to access mailbox
options.
Allows the user to set the parameters for the voice mail operator.
Device Configuration Guide
39