Nortel BCM50 2.0 Configuration Manual page 237

Display prompt
OTHERLEAVEEXIT
Access denied
Already joined
Already parked
Autodial full
Button erased
Call NNN?
YES NO
Calling NNN
PRIORITY LATER
Call blocked
Camped: NNN
CALLBCK
Camp denied
Camp to:
CANCL
Cancel denied
Can't ring again
Cleared>LINENAM
NEXT
CLI COPY INCOMP
Description of error or action
Silent monitor: When you join a monitored call, you can choose to:
– move to another Hunt group member (OTHER)
– mute your telephone out of the current conversation (this does not
disconnect silent monitoring) (JOIN)
– exit the silent monitoring (EXIT)
Programming is busy, or the feature you are trying to use is not compatible with the
configuration of the telephone or line.
Silent monitor: You tried to start a monitoring session on a telephone that does not
support the feature.
Your telephone is connected to the telephone you are trying to call. Check your
active line buttons, and return to that call.
Pickup group: You are connected to the telephone that made the call you are trying
to answer. This display appears if you are on a call to a colleague, your colleague
dials the number of a telephone in your pickup group, and you try to answer that call.
Call park: The person you were talking to has parked your call. You cannot park the
same call.
Auto dial: The memory allocated to auto dial numbers in your system is full.
Auto dial: While programming external auto dial, you erase the button by pressing
HOLD or OK before entering any digits.
You have received a Ring Again offer from a call to an internal telephone. Press the
flashing internal line button or
digital phones, just lift the handset. Otherwise, press
Again to expire.
Wait for the telephone to be answered. If no one answers, press
Ring Again feature or Message feature, or press
Priority Call: You initiate the Priority call transfer to this local.
Priority call: You tried to place a priority call to another telephone in your system. The
person you called has blocked your call.
The person at extension NNN has not answered the camped call. The call has come
back to you. Press the line button or
7100 digital phones, lift the handset to reconnect to the call.
Camp-on: You have tried to camp an internal call. You can camp external calls only.
Camp-on: Dial the number of the internal telephone to which you want to camp the
call.
Message: You entered an invalid number when trying to cancel a message.
You cannot use Ring Again on your current call. You can use Ring Again while you
have a busy signal on an internal call or line pool request, or while an internal call is
ringing.
Message: You cleared an external message from your message waiting list. The
message exists in your message center until you erase it there.
You attempted to allow CLI for an assigned line for more than 30 telephones.
Chapter 27 Display prompts and messages
YES to call the number again. On 7000 and 7100
NO
PRIORITY
CALLBCK to reconnect to the call. On 7000 and
or wait 30 seconds for Ring
LATER to use the
to make a priority call.
Device Configuration Guide
237