Nortel BCM50 2.0 Configuration Manual page 17

BCM features
BCM50 R2 supports the complete range of IP telephony features offered by existing BCM
products:
Note: You enable the following features by entering the appropriate keycodes (no
additional hardware is required).
• VoIP Gateway (H.323 and SIP): Up to 12 VoIP trunks
• VoIP Telephony Clients: Up to 32 VoIP Telephony clients, supporting the range of Nortel
IP Phones.
BCM applications
BCM50 R2 supports many applications provided on the existing BCM platforms.
Note: You enable the following features by entering the appropriate keycodes (no
additional hardware is required).
• Voice Messaging for standard voice mail and auto-attendant features
• Unified Messaging providing integrated voice mail management between voice mail and
common e-mail applications
• Fax Suite providing support for attached analog fax devices
• Voice Networking features
• LAN (computer telephony engine) CTE
• IP Music
• Intelligent Contact Center
Chapter 1 Getting started with BCM
Device Configuration Guide
17