Nortel BCM50 2.0 Configuration Manual page 162

162 Chapter 21 Default memory button programming for telephones
IP telephone 2001 button defaults
Figure 53 2001 default button formatting
02
03
01
does not support a headset. The only indicator on the telephone is the message waiting indicator
(MWI) lamp.
NN40020-300 NN40020-300
Feature
Display menu
commands
Directional
Services
(programmable)
Mail box in
(programmable)
Goodbye (Release)
Hold
Ringing call
(programmable)
The 2001 is a simple version of the IP telephone.
None of the programmable buttons have indicator
displays, so all incoming calls must be set to Ring
only. Figure 53 shows the positions of the three
programmable buttons, and which button number
corresponds to each of the three buttons.
Although two intercom lines are assigned to the
telephone, there is no visible indicator of the lines.
However, a light at the top of the telephone blinks.
The user presses the Hold key to toggle between two
active calls, or to put one call on hold to make a
second call.
Handsfree and mute are not available, since this
telephone does not have an external speaker. It also