Configuring The Operating Mode; Viewing The Diagnostics - Tadiran Telecom Aeonix T200M Series Installation Manual


Table 9 Operating Mode
Parameters

Table 10 Diagnostics
Parameters
52 Configuring the Phone via its Dial Pad

Configuring the Operating Mode

................................................................................................................
1
Press the OK fixed key for at least three seconds on the phone.
2
[SysDef]
Select and enter the password (default = 159753) at the prompt.
3 Select Operating Mode.
4
Select the Operating Mode. See
5
[Esc]
Press several times until the following prompt is displayed:
Restart the phone to apply the new settings?
000.000.000.000
=>Yes
6
[Yes]
Press to apply the settings and
Parameter Description
Survivability Used to enable the call agents to be
defined as Primary or Secondary.
Zip Tone Defines whether the ring tone is
heard over the headset or over the
speaker.

Viewing the Diagnostics

................................................................................................................
1 Click the OK fixed key for at least three seconds on the phone.
2
[SysDef]
Select and enter the password (default = 159753) at the prompt.
3
Scroll to the relevant Diagnostics parameter. See
4
[Esc]
Click several times until the following prompt is displayed:
Restart the phone to apply the new settings?
000.000.000.000
=>Yes
5
[Yes]
Click to apply the new settings and
Parameter Description
Packets Lost Displays the percentage of packets
lost since last connection
Table 9.
No
[No]
to discard the settings.
Web Path
Phone > Operating Mode >
Survivability
Phone > Operating Mode > Zip Tone
Table 10.
No
[No]
to discard the new settings.
Web Path
Information > Statistics > Packets
Lost
T200M Series Installation Manual - Aeonix