44
Supplying Power to the Phone
Connecting to PoE (Type A and B)
................................................................................................................
If a PoE/Adapter switch is available on the bottom of the phone, turn it to "PoE". See
Figure 8 on page
23.
Connecting the AC Wall Power Adapter (Type C)
................................................................................................................
The manufacturer supplies an external, single unit AC power supply adapter. See
Specifications, page
85.
If the power supply unit malfunctions, do not replace with any power supply unit other
than one supplied by the manufacturer for this phone. Using a different power supply
could cause damage to the phone.
1
If a PoE/Adapter switch is available on the bottom of the phone, turn it to
"Adapter". See
Figure 8 on page
2
Plug the AC power adapter into a 115/230VAC receptacle.
3
Insert the DC plug into the jack marked "
base. See
Figure 8 on page
23.
" on the rear of the phone
5V... 2A
23.
T200M Series Installation Manual - Aeonix
Need help?
Do you have a question about the Aeonix T200M Series and is the answer not in the manual?
Questions and answers