Tadiran Telecom Aeonix T200M Series Installation Manual page 89

T200M Series Installation Manual - Aeonix
11
On your workstation, open your browser and type the IP address into the
address bar and browse to the web page of the MGCP keyset. The login
window is displayed.
12
Login to the web page portal.
13
In the SwUpgrade tab of the web page, download the file from the TFTP
Upgrading the Firmware Software, page
server (see
a Enter the IP address of the TFTP server into the TFTP Server IP Address
field.
If more than one field is upgraded at the same time, the phone software might be
damaged. If more than one field needs to be modified, upgrade each field individually
and verify that the phone initializes before upgrading another field.
b
Enter the name of the file(s) into only one of the following fields:
Image Name - The filename of the software version to which the phone will

be upgraded. The filename must include the suffix bin.gz.
Profile Name - All current settings of the phone can be saved as a profile.

When a saved profile is uploaded onto the phone, all of the settings
associated with the profile are applied. The filename of the profile must
include the suffix cfm.
Logo - The logo to appear on the display panel. The logo file must adhere

to the following:
Filetype - bmp;
Maximum height - 128 pixels
Maximum width - 32 pixels
Maximum file size - 1024 bytes
Web Logo Web Logo - The logo to appear on the web portal.

Language File: - Includes the font file to be uploaded to the phone. The

additional language is not used by the MGCP phone.
c
Click Submit.
d Click Upload adjacent to each updated field.
65).
WRITING FLASH
Upgrading the Phone Firmware 81