Registering The Parameters In The Phone - Tadiran Telecom Aeonix T200M Series Installation Manual


Table 3 Network
Parameter Configuration
Options for T207M/NP,
T208M/BL, T207M and
T208M Phones
14 Installing the Phone

Registering the Parameters in the Phone

................................................................................................................
The phone parameters can be configured locally, from the phone or from its web page.

To configure the T207M/NP, T208M/BL, T207M and T208M parameters
from the phone, see

To configure the T207M/NP, T208M/BL, T207M and T208M parameters
from its web page, see
1
Do one of the following:
 Configure the phone to accept a dynamic IP address.

Configure your phone to accept static IP address. For further information,
contact your system administrator.
Table 3 displays the different possible address configurations for T207M/NP,
T208M/BL, T207M and T208M phones.
When entering a static address, be sure to enter the exact address you receive from the
system administrator. Entering an incorrect address could cause network malfunctions.
2
Configure the subnet mask of the phone. For further information, contact your
system administrator.
3
Configure the default router address. For further information, contact your
system administrator.
Conf Phone Subnet Mask Default Router
1 Static IP Static IP
Address Address
2 DHCP DHCP
3 DHCP DHCP
If a parameter is defined as dynamic, the phone will attempt to contact a
DHCP and/or DNS Server to retrieve the information for that parameter.
Therefore, if you define a mandatory address as dynamic, ensure that the IP
phone is on the same network as the relevant DHCP and/or DNS Server.
Configuring the Phone via its Dial Pad, page
Configuring the Phone via its Web Page, page
Static IP Address
DHCP
DHCP
T200M Series Installation Manual - Aeonix
49.
55.
Call Agent
Static IP Address
Static IP Address
DNS - IP Address
DHCP - Domain Name