Sony DVS-9000 User Manual page 107

Hue Rotate: Use a color matte whose hue varies slightly with each frame for
Mix Color: Insert a mix color signal set in the Color Mix menu (see page 50)
Ext Video: Insert the external video signal input to the Ext IN connector in the
Rainbow: Use a freeze image with the hue changing every frame in the
Erasing the afterimages that remain in memory whenever a
keyframe is passed
Press [Trail Eraser], turning it on.
When the effect passes a keyframe, the afterimage is erased before writing a
new afterimage.
Selecting the freeze timing
In the <Trail Freeze Timing> group, select the timing for freezing a trail.
Frame: freeze in frame units.
Field: freeze in field units.
Defocusing the afterimage portion (Defocus)
Note
The function to defocus the trail afterimage portion is not supported on the
MVE-8000A.
106
DME Special Effect Operations
Knob Parameter
1 Luminance
2 Saturation
3 Hue
the trail of the afterimages. You can set the following parameters with the
knobs.
Knob Parameter
1 Luminance
2 Saturation
3 Hue Speed
in the afterimage portion.
afterimage portion.
afterimage portion. The difference from "Hue Rotate" is that many colors
appear simultaneously.
For details of the Rainbow parameters, see the "Hue Rotate" item above.
Adjustment
Luminance
Saturation
Hue
Adjustment
Luminance
Saturation
Speed at which the hue
changes
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
0.00 to 100.00
–12.00 to +12.00