Sony DVS-9000 User Manual page 395

Setting an illegal color limit for matte signals
To enable the illegal color limiter for the signals generated by the DME internal
matte generator, press [Matte Illeg Col Limit] for DME1 in the DME >Input
menu, turning it on.
Making DME system phase adjustment
To adjust the DME reference phase, use the following procedure.
1
2
Setting the TBC window center position
When the MVE-8000A/MVE-9000 is connected through SDI interface, the
DME >Input >TBC Center menu allows you to set the TBC window center
position.
1
2
394
Setup Relating to DME
Press [Unity] in the <Crop> group.
In the DME >Input menu, press [System Phase].
Set the following parameters.
Knob Parameter Adjustment
1 DME1 DME1 system phase adjustment
Phase
2 DME2 DME2 system phase adjustment
Phase
In the DME >Input menu, press [TBC Center].
The TBC Center menu appears.
The status area shows the TBC center position values for DME1, DME 2,
and external input signals.
Note
The TBC center position values for external input signals are shown only
when an SDI-interfaced MVE-9000 is used.
Using any of the following methods, select the input number for which you
want to set the TBC center position.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Setting values
–32.00 to +96.00
–32.00 to +96.00