Sony DVS-9000 User Manual page 333

2
3
4
5
To set the shift operation of the destination selection buttons
To set the operation mode of the rightmost button in the destination selection
button row, select one of the following in the <Dest Shift Mode> group of the
Panel >Aux Assign >RTR Mode Setting menu.
Hold: Acts as a shift button, and the shifted destination selection buttons are
Lock: Acts as a shift button, and pressing the button toggles between the
Off: Acts as a destination selection button, that is, button number 16 on a 16-
To set the source table
1
2
3
4
332
Setup Relating to Operations From the Control Panel
Press [Dest Set] to confirm the selection.
If in step 1 you selected a value in the range 1 to 64, turn the knob to select
the source table.
Knob Parameter Adjustment
3 Source Source table selection
Table
Press [Source Table Set] to confirm the selection.
Repeat steps 1 to 4 as required.
enabled while the button is held down.
shifted and unshifted states of the destination selection buttons.
button system, button number 24 on a 24-button system, and button
number 32 on a 32-button system.
In the Panel >Aux Assign >RTR Mode Setting menu, press [Source Table
Assign].
The Source Table Assign menu appears.
In the <Source Table Select> group, select the source table you want to
manipulate.
Press [Table Assign].
The Table Assign menu appears.
The left of the status area lists the button numbers and set sources, and the
right side lists the source that can be assigned.
Using any of the following methods, select a source selection button and
the source you want to assign.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Setting values
1 to 5