Sony DVS-9000 User Manual page 416

2
Using any of the following methods, select the serial port connected to the
disk recorder for which you want to make settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Port No
a) The range of setting values depends on the DCU port setting. (When the MKS-2700 is
connected, select 2 for the slot and a value in the range 1 to 6 for the port.)
3
Press [Port Setting].
The DCU >Serial Port Assign >DDR VDCP Setting menu appears.
At the top of the status area, the relevant serial port, slot number, protocol,
serial port name, SCU number, and disk recorder type appear.
In the lower part of the status area appear the video port number and
response speed settings.
4
In the <DDR Type> group, select the type of disk recorder.
Player: Functioning as a player.
Recorder: Functioning as a recorder.
5
In the <Name Mode> group, select the file name character count mode.
Fixed 8 Character: Use 8-character file names.
Variable Length: Use variable-length file names.
6
In the <TC Sense> group, select the type of timecode sensing.
Zero based: Mode in which timecode is detected taking the first frame of
the recalled file as 00:00:00:00
SOM based: Mode in which timecode saved in the recalled file is detected
Note
The details of the above operation modes depend on the connected device.
For more information, consult the documentation for the connected device.
7
Using any of the following methods, specify the item to which the video
port number or response speed setting applies.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Adjustment
Serial port
Setting values
a)
1 and upwards
415
Setup Relating to DCU