Sony DVS-9000 User Manual page 371

2
3
4
5
Setting the reference output
To adjust the reference output phase with respect to the reference input, adjust
the following parameters in the Switcher >Output menu.
Knob
2
3
Cropping the image to a 4:3 aspect ratio in an HD system
In an HD system, to crop an image having a screen aspect ratio of 4:3 to an
aspect ratio of 4:3, use the following procedure.
Note
This setting is disabled for the DVS-9000 system.
1
370
Setup Relating to Switcher Processor
The status area shows the output ports and the assigned signals, with the
box 1, box 2, and cross states.
To enable the safe title on/off setting made in the Misc menu, press [Safe
Title], turning it on.
Carry out either of the following operations.
To display a box: Press [Box1] or [Box2], turning it on.
In this case, carry out the following steps 4 and 5.
To display a cross: Press [Cross], turning it on.
When you selected [Box1] or [Box2] in step 3, adjust the following
parameters.
Knob Parameter Adjustment
2 Box Size Box size
3 Luminance Display brightness
a) Adjustable for Box2
When in step 3 you selected [Box1] or [Box2], in the <Box1 Adjust> or
<Box2 Adjust> group, select the screen aspect ratio (16:9/14:9/4:3).
Parameter Adjustment
Line Line phase
Time Time
In the Switcher >Output menu, press [4:3 Crop].
The 4:3 Crop menu appears.
The status area shows the output ports and respective 4:3 Crop mode
settings.
Setting values
50.00 to 100.00
a)
0.00 to 100.00
Setting values
–90 to +90
–32.00 to +96.00