Sony DVS-9000 User Manual page 522

• When turning [Multi] on and replicating the same pattern
Knob Parameter
1 H Multi
2 V Multi
3 Invert Type
a) See "Pattern replication ("Multi")" under "Wipes" in Chapter 1 (Volume 1).
• When turning [Aspect] on and setting the aspect ratio of the pattern
Knob Parameter
1 Aspect
a) See "Aspect ratio" under "Wipes" in Chapter 1 (Volume 1).
• When turning the [Angle] on in the <Rotation> group and slanting
the pattern
Knob Parameter
1 Angle
a) See "Rotation" under "Wipes" in Chapter 1 (Volume 1).
• When turning [Speed] on in the <Rotation> group and rotating the
pattern at a fixed rate
Knob Parameter
1 Speed
a) See "Rotation" under "Wipes" in Chapter 1 (Volume 1).
6
To invert the mask source, return to the Primary CCR menu and press
[Mask Invert], turning it on.
Note
The mask function is common to the primary color correction, secondary color
correction luminance processing, and spot color adjustment functions. For
example, if in primary color correction you set mask 1 to a box, then in
secondary color correction set mask 1 to a pattern, this also changes the setting
in primary color correction to the pattern.
Adjustment
Number of repetitions of pattern
horizontally
Number of repetitions of pattern
vertically
Replication layout
Adjustment
aspect ratio
Adjustment
Angle of pattern rotation
Adjustment
Rotation rate of pattern
Setting values
1 to 63
1 to 63
a)
1 to 4
Setting values
a)
–100.00 to +100.00
Setting values
a)
–100.00 to +100.00
Setting values
a)
–100.00 to +100.00
Color Corrector Functions
521