Sony DVS-9000 User Manual page 319

To cancel an assignment
Select the button, then press [Clear].
This removes the assignment to that button.
To return all device selection button assignments to the factory
default state
In the Device Control Module menu, press [Default].
Assigning devices and functions to the region selection buttons
of the device control block (trackball)/device control block
(joystick)
You can assign devices and functions to the region selection buttons of the
device control block (trackball)/device control block (joystick)
For details of the device control block (trackball)/device control block
(joystick), see Chapter 2 (Volume 1).
1
2
3
4
5
318
Setup Relating to Operations From the Control Panel
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
Press [Joystick/Trackball Module].
The Joystick/Trackball Module menu appears.
The left of the status area shows the region selection buttons of the device
control block. The list on the right shows the devices and functions that can
be assigned.
In the button displays on the left, press the button for the assignment.
Using any of the following methods, select the device or function to be
assigned.
• Press directly on the list on the right.
• In the list on the right, press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
Knob Parameter
1 Device
Function
Press [Set].
This assigns the device or function selected in the list to the button.
Adjustment
Selection of device or
function to be assigned
Setting values
1 and upwards