Sony DVS-9000 User Manual page 114

Knob
2
3
a) 0.00 represents no afterimage, and 100.00 represents no decay in the afterimage.
4
To erase the afterimages, press [Wind Eraser], turning it on.
Selecting the signal for the afterimage portion
In the <Wind Source> group, select the image to fill the afterimage portion.
Notes
• "Mix Color"or "Ext Video"can only be applied to one of the background (see
page 123), flex shadow (see page 40), trail (see page 104), and wind effects.
If you select "Mix Color"or "Ext Video" in the wind settings, a selection of
"Mix Color"or "Ext Video" in any of the other effects is disabled, and "Flat
Color" is selected in its place.
• When executing combining four channels of DME images, "Mix Color" and
"Ext Video" cannot be selected.
Freeze Video: Freeze the input image to use as the afterimage.
Flat Color: Use a single color matte for the afterimage; you can set the
following parameters with the knobs.
Knob
1
2
3
Hue Rotate: Use a single color matte with the hue changing for each frame as
the afterimage; you can set the following parameters with the knobs.
Knob
1
2
3
Mix Color: Insert a mix color signal (see page 50) in the afterimage portion.
Ext Video: Insert the external video signal input to the Ext IN connector in the
afterimage portion.
Parameter Adjustment
Shift H Extension in the horizontal
direction
Shift V Extension in the vertical
direction
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Speed Rate at which hue changes –12.00 to +12.00
Setting values
–100.00 to +100.00
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
0.00 to 100.00
DME Special Effect Operations
113