Sony DVS-9000 User Manual page 324

Note
When a button number in the range 121 to 128 is selected, execution of
"Delete" is impossible. The signal assignments to button numbers 121 to 128
cannot be changed. When a signal assigned to any other button number is
deleted, moving up of signals ends when the signal assigned to number 120 has
moved to number 119, and the signals assigned to numbers 121 to 128 are
maintained in their original lines.
To create tables 1 to 14
When creating tables 1 to 14, in the same way as when creating the main table,
you can assign the same signal to more than one button number, or delete
currently assigned signals. However, assignment of video and key
combinations is impossible.
1
In the Panel >Xpt Assign menu, press [Table Button Assign].
The Table Button Assign menu appears.
The table number appears on the upper left part of the status area.
The left part of the status area shows the cross-point button numbers, video
and key pair numbers, video signal source names and source numbers, and
key signal source names and source numbers. When the shift button is
pressed, the number column is distinguished by color.
The right part shows the video and key pair numbers, and the names of
video signals and key signals set in the main table.
The Table Button Assign menu also allows you to access the Main, V/K
Pair Assign menu and the Src Name/LCD Color menu.
2
Using the knob, select the table number.
Knob Parameter
1 Table No
3
Using any of the following methods, select the button number.
• Press an auxiliary bus control block cross-point button.
(The auxiliary bus control block is in selection mode, only when the
menu for cross-point button selection is showing.)
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
2 Button No
4
Using any of the following methods, select the pair number.
• Press directly on the list in the status area.
Adjustment
Selection of the table to be set
Adjustment
Cross-point button selection
Setup Relating to Operations From the Control Panel
Setting values
1 to 14
Setting values
1 to 128
323