Crop Settings - Sony DVS-9000 User Manual

If Mix Color or Ext Video selected, the border color changes according to the
mix color signal or external video signal.
Softening the border edges
Press [Border Soft], turning it on, and set the following parameters.
Knob
1

Crop Settings

This effect crops the image.
For an illustrative figure and other information, see "DME Special Effects" in
Chapter 1 (Volume 1).
Cropping the image
1
In the DME menu, select VF1 'Edge' and HF1 'Border/Crop.'
The Border/Crop menu appears.
2
Press [Crop], turning it on.
The Crop effect is enabled. You can adjust degree of cropping with the
knobs.
3
Set the parameters.
The valid ranges of the parameter values depend on the aspect ratio (4:3/
16:9) selected in the system, as follows.
• 4:3 mode
Knob
1
2
3
Parameter Adjustment
Soft Softness of inner side of border
Parameter group [1/2]
Parameter Adjustment
H Crop positions on left and right
sides
V Crop positions on top and
bottom sides
All Crop positions on all sides
Setting values
0.00 to 100.00
Setting values
Left value shown
Top value shown
Left value shown
DME Special Effect Operations
27