Sony DVS-9000SF Operation Manual
Switcher processor pack / production switcher processor
Hide thumbs
Also See for DVS-9000SF:
- User manual (462 pages) ,
- Installation manual (42 pages) ,
- User manual (619 pages)
Related Manuals for Sony DVS-9000SF
Summary of Contents for Sony DVS-9000SF
- Page 1 SWITCHER PROCESSOR PACK DVS-9000-C DVS9000SF-C PRODUCTION SWITCHER PROCESSOR DVS-9000 DVS-9000SF BKDS-9160 BKDS-9161 BKDS-9470 MKS-8110SD MKS-8111SD HK-PSU04 OPERATION MANUAL 1st Edition BKDS-9162 BKDS-9210 [English]...
- Page 2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. THIS APPARATUS MUST BE EARTHED. For the customers in the USA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
- Page 3 Ce produit est prévu pour être utilisé dans l’environnement électromagnétique suivant: E4 (environnement EMC contrôlé ex. studio de télévision). Periodic inspections To guarantee safe long-term operation, periodic inspections are recommended. Please contact your Sony representative for detailed information about the content and cost of periodic inspections.
-
Page 4: Table Of Contents
Flow of Video Signals ... 16 Power Supply Unit Status Indicators... 17 Specifications ... 18 DVS-9000 Production Switcher Processor... 18 DVS-9000SF Production Switcher Processor ... 19 BKDS-9160 24 Output Board Set ... 19 BKDS-9161 Monitor Output Board ... 20 BKDS-9162 12 Output Connector Board...20 BKDS-9210 Mix/Effect Board ...20... -
Page 5: Overview
Overview The DVS-9000-C or DVS9000SF-C Switcher Processor Pack is a high-performance, multi-function production switcher processor for use in an SDTV-format DVS-9000 video switcher system. It has a wide range of application, being usable in studios and the ENG and OB vans of large- scale live production systems as well as in postproduction editing systems. - Page 6 DVS-9000SF Production Switcher Processor DVS-9000SF Production Switcher Processor main unit. This is the main chassis unit of the DVS-9000SF Production Switcher Processor (size EIA 4RU). It is supplied with boards for 1 M/E banks, 17 inputs, and 12 outputs as standard equipment.
-
Page 7: Location And Function Of Parts
Sony service representative. Note If a status indicator does not light when you turn a POWER switch on, there may be a fault in the power circuits. Turn the POWER switch off and contact your Sony service representative. POWER A POWER B... -
Page 8: Dvs-9000 Rear Panel
DVS-9000 Rear Panel 1SWITCHER REMOTE 1 to 4 connectors 2SWITCHER CTRL connector 3 EXT connector 4REF OUT connector 5SWITCHER DATA connector 6REF IN connectors 7DME EXT IN 1 to 4 connectors qjOUTPUTS 1 to 48 connectors qkPRIMARY INPUTS 1 to 68 connectors qlEXTEND INPUTS 69 to 80 connectors w;MONITOR OUTPUTS 49 to 56 connectors Location and Function of Parts... - Page 9 * For information about Ethernet switches that can be used in an DVS-9000 system, contact your Sony service representative. * Ethernet is a trademark of XEROX Corporation. For more information about Ethernet switch connectors, see “DVS-9000 System Configuration”...
- Page 10 In that case, the AC IN C and D connectors is not used. Caution For information about installing an HK-PSU04, contact your Sony service representative. q OUTPUTS 1 to 48 connectors (BNC type) (BKDS-9160) These connectors output serial digital signals. They can be freely assigned to program output, preview output, AUX output and so on.
-
Page 11: Dvs-9000Sf Front Panel
Sony service representative. Note If a status indicator does not light when you turn a POWER switch on, there may be a fault in the power circuits. Turn the POWER switch off and contact your Sony service representative. POWER A POWER B... -
Page 12: Dvs-9000Sf Rear Panel
REMOTE 3 TERMINAL * For information about Ethernet switches that can be used in an DVS-9000 system, contact your Sony service representative. For more information about Ethernet switch connectors, see “DVS-9000 System Configuration” (page 15). For detailed information about setting up the Ethernet switch, refer to the documentation supplied with the Ethernet switch. - Page 13 SWITCHER REMOTE 1 to 4 connectors (D-sub 9-pin, RS-422A) Used to control the DVS-9000SF AUX bus from external devices, and to operate the DVS-9000SF from editing control systems such as the BVE-9100. Specify the types of connected devices on the center control panel.
- Page 14 r OUTPUTS 1 to 24 connectors (BNC type) (BKDS-9162) These connectors output serial digital signals. They can be freely assigned to program output, preview output, AUX output and so on. There are two BNC connectors for the lower numbers on each slot (1 to 4, 13 to 16) and one BNC connector for the upper numbers (5 to 12, 17 to 24) (the BKDS-9162 is required 13 to 24).
-
Page 15: Example System Configuration
Example System Configuration DVS-9000 System Configuration The figure below shows the configuration of a DVS-9000 system. Ethernet switch Ethernet switch REMOTE DATA CTRL SWITCHER DATA SWITCHER CTRL EXT IN MONI OUT DATA CTRL REMOTE REF IN DATA CTRL REMOTE 2 REMOTE 1 REF OUT REMOTE 4... -
Page 16: Flow Of Video Signals
“Accessories not supplied” (page 18). b) Terminate with the supplied 75 terminators. Terminators are supplied in the product package. Example System Configuration The flow of signals is the same in a DVS-9000SF system. DME EXT IN DME MONI OUT 1 - 4... -
Page 17: Power Supply Unit Status Indicators
Power Supply Unit Status Indicators The power supply unit status indicators show the status of the power supply unit during operation and when the unit is powered on. Whenever a power error is detected, it is reflected immediately by the indicator. Meaning of status indicator displays Indicator Status... -
Page 18: Specifications
Specifications The following specifications show the reference performance for this unit and individual option boards/ modules. Design and specifications are subject to change without notice. DVS-9000 Production Switcher Processor General Power requirements 100 to 240 V AC, 50/60 Hz Current consumption 100 V: 8.5 A, 240 V: 4.2A Peak inrush current (1) Power ON, current probe method:... -
Page 19: Dvs-9000Sf Production Switcher Processor
DVS-9000SF Production Switcher Processor General Power requirements 100 to 240 V AC, 50/60 Hz Current consumption 100 V: 5.4 A, 240 V: 2.5 A Peak inrush current (1) Power ON, current probe method: 60 A (100 V), 110 A (240 V) -
Page 20: Bkds-9161 Monitor Output Board
CN board: 274×94 mm ×3 inches) (using 2 boards) Mass Approx. 2 kg (4 lb 6 oz) Output Outputs 24 (BNC type), 1 to 4 and 13 to 16, each with 2 outputs Signal format SMPTE259M-C Signal level 0.8 Vp-p 10% Signal transfer rate 270 Mbps Accessories supplied... -
Page 21: Mks-8110Sd 17 Input Board
Relay contact outputs: 4 (30V AC/DC, 0.1A) Open collector outputs: 4 Input Inputs 4 (BNC type) Signal format SMPTE259M-C Signal level 0.8 V p-p 10% Signal tansfer rate 270 Mbps Return loss 15 dB Cable length 200 m (5C-2V cable, BELDEN8281 or equivalent) Output Outputs... - Page 22 Specifications...
- Page 23 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...
- Page 24 Sony Corporation B & P Company DVS-9000 Printed in Japan (WW) 2002.07.13 3-690-433-01 (1) © 2002 Printed on recycled paper...