Sony DVS-9000 User Manual page 521

3
4
5
520
Color Corrector Functions
In the <Mask Source> group, select the mask source.
Box: signal from dedicated box generator
Pattern: signal from dedicated pattern generator
Depending on the selection in step 3, adjust the following parameters.
• When Box is selected
Knob Parameter Adjustment
1 Top Top position
2 Left Left position
3 Right Right position
4 Bottom Bottom position
5 Soft Degree of softness of box
• When Pattern is selected
Knob Parameter Adjustment
1 Size Pattern size
2 Soft Degree of softness of pattern
edge
5 Pattern Pattern number
For the pattern selection, you can also press [Mask Ptn Select] in the
Mask1 Adjust menu, then use the Mask Ptn Select menu.
Press any of the displayed patterns (standard wipe patterns 1 to 24) to
select it, then you can adjust the following parameters.
Knob Parameter Adjustment
1 Size Pattern size
2 Soft Degree of softness of pattern
edge
When selecting the pattern as a mask source, set the pattern modifiers as
required.
• When turning [Position] on and setting the pattern position
Knob Parameter Adjustment
1 Position H Horizontal position
2 Position V Vertical position
a) See "Positioner" under "Wipes" in Chapter 1 (Volume 1).
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
1 to 24
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
a)
–200.00 to +200.00
a)
–200.00 to +200.00