Shaped Video Settings - Sony DVS-9000 User Manual

Applying the Separate Sides effect
1
In the DME menu, select VF6 'Input/Output' and HF2 'Video/Key.'
The Video/Key menu appears.
2
Press [Separate Side], turning it on.
The Separate Sides effect is enabled. If the video and key signals currently
being output to the monitor are the front side, you can select the front
signals. If they are the back side, you can select the back signals. Video and
key signals are selected with the cross-point control blocks of each M/E
bank or the PGM/PST bank.

Shaped Video Settings

Switching shaped video on or off
You can select whether or not the following signals are treated as shaped video
(a signal subjected to key processing).
• The input video signal from the switcher, for each of the front and back sides
of an image
• The output video signal
Notes
• On the MVE-8000A, the shaped video function is valid only when the MKE-
8021A is installed to provide an SDI interface.
• When the MKE-8021A is installed in the MVE-8000A to provide an SDI
interface, turning the shaped video function off enables both "Ext Key" and
"Lum Key" in each of the <Front Key> and <Back Key> groups.
1
In the DME menu, select VF6 'Input/Output' and HF2 'Video/Key.'
The Video/Key menu appears.
2
In the <Shaped Video> group, press each of the following buttons to
switch it on or off.
Front Input: When this is on, the front image of the input video signal is
treated as shaped video.
Back Input: When this is on, the back image of the input video signal is
treated as shaped video.
Output: When this is on, the output video signal is treated as shaped video.
DME Special Effect Operations
125