Vtr/Disk Recorder/Extended Vtr Timeline - Sony DVS-9000 User Manual

Production switcher system
Hide thumbs Also See for DVS-9000:
Table of Contents

Advertisement

VTR/Disk Recorder/Extended VTR Timeline

Note
When executing a timeline using a disk recorder or Extended VTR, note the
following points.
• It is not possible to use loop and recue on the timeline.
• When carrying out keyframe settings, be sure to recall the file for operation
• If the duration of the recorded video clip is less than the keyframe duration,
When executing the timeline using a disk recorder, also take note of the
following points.
• Set the keyframe duration to at least 30 frames.
• From pressing the [RUN] button to the time when the effect actually starts
• To execute an effect, be sure to carry out a Rewind.
164
Control of VTRs, Extended VTRs, and Disk Recorders
first.
after playback to the end of the clip, the remainder of the keyframe duration
is filled with a still of the last frame of the clip (see figure below).
Example: When the recorded clip for keyframe 1 has a duration of 15 frames
30 frames
15 frames
KF1
: Interval for which clip is recorded
: Interval in which still frame is displayed
In this example, when keyframe 1 is executed, the first 15 frames consist of clip
playback and the remaining 15 frames show the 15th frame as a still image.
execution may take around one second.
In order that pressing the [RUN] button after [REWIND] make the effect
start execution as soon as possible, set cueing up of the file for operation as
1)
rewind operation
. In the first keyframe
the cued-up file, do not set the start point, but set only the start command.
1) If the setting when the [REWIND] button is pressed is for the first keyframe to be executed,
then the first keyframe is executed, and otherwise the setting for the Rewind Action is carried
out.
2) If the setting when the [REWIND] button is pressed is for the first keyframe to be executed,
then the second keyframe is executed, and otherwise the first keyframe is executed.
For example, when the start command only is set for a keyframe, playback
15 frames
KF2
2)
to be executed with [RUN], for
30 frames
KF3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvs-9000sf

Table of Contents