Sony DVS-9000 User Manual page 42

Knob
3
4
5
a) The Soft parameter is valid only when [Internal] is selected in the <Flex Shadow Source>
group.
• 16:9 mode
Knob
1
2
3
4
5
a) The Soft parameter is valid only when [Internal] is selected in the <Flex Shadow Source>
group.
4
In the <Flex Shadow Source> group, select the signal to use for the flex
shadow.
External: Generate the shadow using an input signal.
Internal: Generate the shadow using a full-size key signal.
5
In the <Flex Shadow Fill> group, select the signal to insert in the flex
shadow.
Flat Color: single color
Mix Color: mix color signal set in the Color Mix menu (see page 50)
Ext Video: an external video signal input to the Ext IN connector
6
Only if Flat Color is selected in step 5, adjust the following parameters.
Knob
1
2
3
Adjusting the size of the flex shadow
1
In the Flex Shadow menu, press [Size], turning it on.
Parameter Adjustment
Size All Enlarge or shrink horizontally and
vertically
a) Softness of shadow
Soft
Density Density of shadow
Parameter Adjustment
H Move shadow horizontally
V Move shadow vertically
Size All Enlarge or shrink horizontally and
vertically
a) Softness of shadow
Soft
Density Density of shadow
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Setting values
Value of Size H (see
page 42) shown
0.00 to 100.00
0.00 to 100.00
Setting values
–8.00 to +8.00
–4.50 to +4.50
Value of Size H (see
page 42) shown
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
DME Special Effect Operations
41