Sony DVS-9000 User Manual page 475

4
5
6
Notes
• During macro editing, you can press a mode selection button in the Flexi Pad
474
Macro Operations in the Standard Type Flexi Pad Control Block
This assigns the Flexi Pad control block to macro editing, and the auto
insert function is enabled. The [MCRO] button lights red.
As an example, when register 12 is specified, the buttons in the memory
recall section appear as in the following figure.
Example:
7
4
1
0
In the same way as in the numeric keypad control block, create the events
you want to save in the macro.
For details, see step 2 (page 462) of "Creating a new macro."
Repeat step 4 to save the desired events in the macro.
The operations you carry out on the control panel are saved as a sequence
of events in the macro.
The numeric display appears as follows.
Example:
Press the [STORE XX] button in the memory recall section (where XX is
the register number).
The [STORE STATS] button lights amber.
This saves the created macro in the register, and macro editing ends.
The Flexi Pad control block returns to the state before macro editing began.
The [MCRO] button lights amber.
control block other than the [MCRO] button (for example, the [WIPE] button
8 9
Press to set a pause length.
5 6
"12" is the number of the currently
recalled register. Pressing this button
saves the macro, and the Flexi Pad
2 3
section switches back from macro
editing mode to the recall operation
STOR
mode.
PAUS
/12
Total number of events
Position of last saved event