Interfacing With External Devices (Device Interface Menu) - Sony DVS-9000 User Manual

Assigning a function to the key 2 row cross-point buttons
You can assign a function to the key 2 row cross-point buttons of each of the
M/E-1 to M/E-3, or PGM/PST banks, and use them in the same way as the
buttons in the utility/shot box control block.
1
In the Prefs/Utility menu, press [Key2/4 Bus Button Assign].
The Key2/4 Bus Button Assign menu appears. The cross-point settings for
the key 2 row appear.
2
Refer to "Assigning a function to a memory recall button in the utility/
shotbox control block" (page 339) to make the assignment. Note,
however, the following differences.
• The bank setting of knob 1 is from 1 to 5.
• The adjustment range of knob 2 is from 1 to the number of cross-point
buttons.
• The character string for a button name is a maximum of four characters.
For details of executing a utility/shot box function with the key 2 row, see
"Executing Utilities With the Cross-Point Buttons in the Key 2 Row"
(page 258) and "Executing a Shot Box Function With the Key 2 Row
Cross-Point Buttons" (page 269).
Interfacing With External Devices (Device Interface
Menu)
To carry out setup relating to connections with external devices, display the
Panel >Device Interface menu.
To display the Device Interface menu
In the Engineering Setup menu, select VF2 'Panel' and HF5 'Device
Interface.'
Making control panel GPI input settings
1
In the Panel >Device Interface menu, press [GPI Input].
The GPI Input menu appears.
2
Using any of the following methods, select the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
Setup Relating to Operations From the Control Panel
345