Control Of P-Bus Devices; Creating And Editing The P-Bus Timeline - Sony DVS-9000 User Manual

Control of P-Bus Devices

Creating and Editing the P-Bus Timeline

This section describes how to set an action for a keyframe point, and edit the
P-Bus timeline.
For details of keyframe creation and editing operations, see "Creating and
Editing Keyframes" (page 191).
Note
Using the P-Bus timeline function requires the P-Bus control mode to be set to
[Timeline]. Carry out this setting in the Engineering Setup >Panel >Device
Interface menu (see page 350).
Setting an action
1
In the Device menu, press VF2 'P-Bus Timeline.'
The Device >P-Bus Timeline menu appears.
The status area shows two lists. The left list is for setting combinations of
devices and actions. The settings in this list will be saved as keyframe point
data. The right list is for selecting the action.
2
Select the P-Bus device for which you want to set an action, by using any
of the following methods to specify the device ID.
• Press directly on the list on the left of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
3
Using either of the following methods, select the action.
• Press directly on the list on the right of the status area.
• Turn the knob.
Knob
2
a) 1: Off (no specification)
2: Store
Parameter Adjustment
ID Device number
Parameter Adjustment
Action No Action
Setting values
0 to 23
Setting values
a)
1 to 4

Control of P-Bus Devices

143