Sony DVS-9000 User Manual page 117

6
7
To select a texture pattern
1
2
3
116
DME Special Effect Operations
c) Plus emphasizes bumps in texture, minus emphasizes depressions. 0.00 is a flat surface.
Parameters when you selected Non Linear
Knob Parameter Adjustment
5 Amp Distance of light
a) Light appears from Z direction. At –100.00 the light goes deepest, at +100.00 the whole
image is lit like a flat effect.
If you selected Texture in step 4, select the pattern as explained in the next
section "To select a texture pattern."
If you selected Texture in step 4, select the way it is applied in the <Surface
Axis> group.
Move: The texture moves together with the DME image.
Fix: The texture does not move, even if the DME image moves.
For the difference between these application methods, see "Digital Multi
Effects (DME)" in Chapter 1 (Volume 1).
Note
If Non Linear is selected in the <Surface Select> group, Fix is disabled.
Behavior is the same as Move.
In the Spot Lighting menu, press [Texture Ptn Select].
The Texture Ptn Select menu appears.
Two lists appear in the status area. The list on the left displays the number
and name of the currently selected texture. The list on the right is for
selecting a texture.
In the <Texture Pattern> group, press [User] or [Factory] to select the
texture pattern list.
[User]: List of texture patterns created by the user. (See "Adding user
texture patterns" (page 286).
[Factory]: List of texture patterns stored in the system when shipped from
the factory.
Do one of the following to select a texture.
• Press directly on the list on the right of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Setting values
a)
–100.00 to +100.00