Macro Attachment Assigning
The term "macro attachment" refers to the assignment of a macro register to a
control panel button or a particular position of a fader lever, so that the macro
execution is linked to the normal function of the button or the operation of the
fader lever.
For an overview of macro attachment, see "Macros" in Chapter 1 (Volume 1).
Setting and Canceling a Macro Attachment
Setting a macro attachment to a button
This section describes the example of setting a macro attachment for the
background A row cross-points.
See "Macros" in Chapter 1 (Volume 1) for the buttons for which a macro
attachment can be set.
1
Recall the macro register you want to assign to the button.
For details of recall from the numeric keypad control block, see page 460.
For details of recall from the Flexi Pad control block, see page 470.
2
To set in pre macro mode, hold down the [PRE MCRO] button in the cross-
point control block, and to set in post macro mode, hold down the [POST
MCRO] button, and then press the desired button in the background A row.
Macro Attachment Assigning
495