Setting Button Assignments (Prefs/Utility Menu) - Sony DVS-9000SF User Manual

To select a destination selection button for a snapshot
1
2

Setting Button Assignments (Prefs/Utility Menu)

To assign functions to the user preference buttons ([PREFS 1] to [PREFS 8])
in the menu control block and the memory recall buttons in the utility/shotbox
control block, display the Panel>Prefs/Utility menu.
To display the Prefs/Utility menu
In the Engineering Setup menu, select VF2 'Panel' and HF4 'Prefs/Utility.'
The status area shows the settings of the user preference buttons.
Assigning functions to user preference buttons
Use the following procedure.
266
Setup Relating to Operations From the Control Panel
Note
This setting is disabled for the CCP-9000.
To set whether snapshots are recalled for each destination selection button
individually, use the RTR Mode Setting menu as follows.
Use any of the following methods to select the destination selection button
to which the setting applies.
• Press directly on the list on the left of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Dest No Selection of destination selection
button
Press [SS Enable], turning it on or off.
On: When a snapshot applying to the router is recalled, the recall also
applies to the selected destination selection button.
Off: When a snapshot applying to the router is recalled, the recall does not
apply to the selected destination selection button.
Note
When a destination selection button is set to Inhibit, then even if SS Enable
is on, the snapshot for that destination is not recalled.
Setting values
1 to 64