Viewing Lag Membership - NETGEAR ProSafe FS728TP Software User Manual

FS728TP Smart Switch Software User Manual

Viewing LAG Membership

The LAG Membership Page allows network managers to assign ports LAGs.
To assign ports to LAGs:
1. Click Switch > LAG Configuration > LAG Membership. The LAG Membership Page
opens:
Figure 5-43
The LAG Membership Page contains the following fields:
– LAG Port – Displays the LAG number.
– Link State – Displays the LAG operational status. The possible field values are:
– Link Present – Indicates the LAG is currently linked and forwarding traffic.
– Link Not Present – Indicates the LAG is currently not linked.
– Member – Displays the ports that are attached to the LAG.
– Delete – Removes the selected LAG.
– Checked – Removes the selected LAG.
5-65 Configuring the Device Using Your Browser
v2.0, November 2006