Logs Configuration - NETGEAR ProSafe FS728TP Software User Manual

Logs Configuration

The Log Configuration Page contains fields for defining which events are recorded to which logs.
It contains fields for enabling logs globally, and parameters for defining logs. Log messages are
listed from the highest severity to the lowest severity level. When a severity level is selected, all
severity level choices above the selection are selected automatically.
To enable event logging:
1. Click System > Logs > Logs Configuration. The Log Configuration Page opens:
Figure 5-32
The Log Configuration Page contains the following fields:
– Enable Logging – Indicates if device global logs for Cache, File, and Server Logs are
enabled. Console logs are enabled by default. The possible field values are:
– Checked – Enables device logs.
– Unchecked – Disables device logs.
– Severity – Indicates the log severity and urgency level. The following are the available log
severity levels:
Configuring the Device Using Your Browser
FS728TP Smart Switch Software User Manual
v2.0, November 2006
5-42