Update The Firmware On The Switch - NETGEAR MS108EUP User Manual

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch

Update the firmware on the switch

The switch firmware does not update automatically, so you must update it manually.
You can manually check for the latest firmware version, download the firmware, and
upload it to the switch.
CAUTION: Always read the release notes before updating the switch's firmware.
To manually check for new switch firmware and update the switch:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SETTINGS.
The CONFIGURATION FILE page displays.
5. From the menu on the left, select FIRMWARE.
The FIRMWARE page displays. The page also shows the UPDATE FIRMWARE section.
The FIRMWARE VERSION displays the current firmware version of the switch.
6. To check if new firmware is available, click the netgear.com link in the FIRMWARE
section.
A NETGEAR web page opens.
7. Click the Downloads button.
8. If new firmware is available, download the firmware file to your computer.
If the file does not end in .bin or .image, you might need to unzip the file. For
example, if the file ends in .rar, you must unzip the file.
9. In the FIRMWARE UPDATE section, click the purple file icon, navigate to the firmware
file that you just downloaded, and select the file.
10. Click the UPDATE button.
A pop-up window displays a warning and the firmware update process starts.
Maintain and Monitor the Switch 69 User Manual