Resetting the Factory Default Values
The Factory Reset Page allows network managers to reset the device to the factory defaults shipped with the switch. Restoring factory defaults
results in erasing the configuration file. The stacking defaults are not restored from this page, including:
•
The stacking mode
•
The stacking cables
•
The Unit ID numbering
To restore stacking defaults, press the button on the front panel of your device. To reset the factory defaults:
Click Factory Reset.
1.
2.
Click
The Factory Reset Page opens.
Figure 5 - 79: Factory Reset Page
. The device reboots and the original default values are set.
Page 124