Every 250 Service Hours; Checking The Radiator Hoses And The Clamps; Checking The Fuel Line And The Intake Air Line; Checking And Adjusting The V-Belt Tension - Kubota SSV65 Operator's Manual

Skid steer loader
Hide thumbs Also See for SSV65:
Table of Contents

Advertisement

EVERY 250 SERVICE HOURS

EVERY 250 SERVICE HOURS
Carry out all 50 hour servicings at the same time.
1. Checking the radiator hoses and
the clamps
Check the water hoses for proper connection.
WARNING
To avoid personal injury or death:
• Wait long enough for the radiator coolant to
cool down.
Carry out the check of the radiator hoses and the
clamps of every 250 hours or every six months,
whichever comes first.
1. If the hose clamps become loose or water leaks,
tighten the hose clamps properly.
2. If the radiator hoses become swollen, aged, or
cracked, replace the radiator hoses and re-tighten
the hose clamps properly.
(1) Radiator hose
2. Checking the fuel line and the
intake air line
1. Check to see that all fuel lines and hose clamps are
tightened and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
SSV65,SSV75
(2) Hose clamps
(1) Fuel lines
(1) Hose
3. Checking and adjusting the V-belt
tension
WARNING
To avoid personal injury or death:
• First stop the engine and remove the key.
• After servicing, make sure to replace the belt
cover in its original position.
(1) Belt cover
 MAINTENANCE
(2) Fuel drain line
(2) Hose clamps
(2) Bolt
93

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ssv75

Table of Contents