Kubota SSV65 Operator's Manual page 119

Error Code
Problem or Failure
Number
Requirement for the DPF
E:9001
regeneration.
E:9002 DPF is regenerated.
Requirement for the DPF
E:9003
regeneration.
Requirement for the DPF
E:9004
replacement.
Requirement for the DPF
E:9006
regeneration.
Requirement for the DPF
E:9007
regeneration.
E:9010 Engine stop for DPF
E:9100 Rpm sensor system
Fuel or rail pressure sys-
E:9101
tem
E:9102 SCV system
Intake air temperature
E:9103
sensor system
Coolant temperature sys-
E:9104
tem
Fuel temperature sensor
E:9105
system
E:9106 Injector system
Intake air pressure sensor
E:9107
system
E:9108 Battery voltage system
E:9109 Sensor voltage system
E:9110 Main relay system
SSV65,SSV75
Machine condition
Engine performance
Accelera- Engine out- Engine
tion limited put limited stopped
◎
-
◎
-
◎
-
◎
-
- -
◎
-
- -
○ ○
◎ ◎
◎ ◎
- -
◎ ◎
- -
◎ ◎
- ○
◎ ◎
◎ ◎
- -
Machine performance
DPF must be regenerated,
but low engine rpm is unable
to start the DPF regeneration.
○
If you leave the machine with
the hydraulic locked, the en-
gine can stop automatically.
- -
DPF must be regenerated,
- but unable to start the DPF
regeneration.
- You must replace the DPF.
DPF must be regenerated,
but unable to start the DPF
-
regeneration because the in-
hibit switch is activated.
DPF must be regenerated,
but unable to start the DPF
regeneration because the in-
○ hibit switch is activated.
If you leave the machine with
the hydraulic locked, the en-
gine can stop automatically.
The DPF regeneration fails to
function. Leave the machine
◎
with the hydraulic system
locked, by which the engine
stops itself.
- -
◎
-
- -
- -
- -
- -
○ -
- -
○ -
○ -
- -
TROUBLESHOOTING
Provisional measure and
Correction
Rev up the engine rpm and
start the DPF regeneration.
If the error code number
still appears, imme-
"E:9001"
diately contact your local
dealer.
-
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Move the machine to a safe
place and release the inhibit
switch to start the DPF regen-
eration. If the error code num-
ber still appears,im-
"E:9006"
mediately contact your local
dealer.
Restart the engine, move the
machine to a safe place, and
release the inhibit switch to
start the DPF regeneration.
If the error code number
still appears, imme-
"E:9007"
diately contact your local
dealer.
Restart the engine, move the
machine to a safe place, and
release the inhibit switch to
start the DPF regeneration.
If the error code number
still appears, imme-
"E:9010"
diately contact your local
dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
(Continued)
115