Lifting; Lifting The Machine - Kubota SSV65 Operator's Manual

LIFTING

LIFTING

LIFTING THE MACHINE

DANGER
To avoid personal injury or death:
• The instructions for safe lifting are described in
the Lifting the
instructions in the Lifting the machine section
carefully before lifting the machine. Make sure
that the operating personnel read the operator's
manual carefully before lifting.
WARNING
To avoid personal injury or death:
• Do not use damaged chains, hooks and lifting
devices.
The loader can be lifted with the Single-Point Lift that is
available as a kit from your KUBOTA dealer.
The Single-Point Lift, supplied by KUBOTA, is designed
to lift and support the KUBOTA loader without affecting
rollover and falling object protection features of the
operator cab.
(1) Lifting eye
IMPORTANT :
• Follow the procedure so the unit cannot roll.
1. Select a firm, level surface.
2. Lower the working equipment to the ground.
70
machine section. Read
3. Stop the engine.
4. Set the arm rest to the locked position.
5. Apply the parking brake switch.
• Do not lift loads that exceed the maximum rated
capacity of the hoist and attaching hardware.
• Do not enter and do not allow others to enter
the working area under the suspended load,
and do not move the load over people. Only
move the load in an area where the equilibrium
can be maintained.
• Always inspect
including chains, hooks and lifting devices
before each use. Do not use any worn or
damaged attaching hardware or if the safety
latch is missing.
• Do not use attaching hardware, including
chains and hooks, in extreme temperature or
other environmental conditions that exceed the
manufacturer's specifications.
• Disengagement of the load can cause severe
injury or death. The use of a hook with a safety
latch does not preclude inadvertent detachment
of a slack sling load from the hook. Visually
verify proper engagement of hook or shackle in
all instances.
• Comply with all federal, state, and local
regulations and safety standards before lifting
the machine.
• Make sure that the lifting chains and hooks are
strong enough to withstand the load being
lifted.
• Be sure that the hooks have safety latch.
• Before lifting the machine, be sure that
attachments are properly attached.
Model
SSV65
name
Model
Open Cab
type
*1
Weight 3220 kg 3320 kg
*1 SSL weight with standard (non-hydraulic) bucket
Procedure for lifting
1. Lift slowly and vertically.
2. Move the machine slowly into place.
LIFTING THE MACHINE
the attaching hardware,
SSV75
Closed Closed
Open Cab
Cab Cab
3740 kg 3840 kg
SSV65,SSV75