Changing The Engine Oil; Replacing The Engine Oil Filter Cartridge - Kubota SSV65 Operator's Manual

MAINTENANCE
3. Remove and replace the outer element and the
inner element with new them.
When reassembling, install the dust-cover so that
its top-indicating-mark (arrow) faces up-wards.
(1) Inner element
(2) Outer element
(3) Dust-cover

7. Changing the engine oil

WARNING
To avoid personal injury or death:
• First stop the engine, and then remove the key
and wait long enough for the oil to cool down.
IMPORTANT :
• Before filling engine oil, wipe away all sand and
dust from around the oil filling port.
• Make sure to use an identical type of engine oil.
• The machine has been filled with engine oil
before delivery.
See RECOMMENDED OILS, GREASES, AND
FUELS on page 122 section. Do not mix
different oils.
1. Loosen the bolts and slide the under cover on the
bottom of the frame.
(1) Under cover
(2) Bolts
96
(4) Clamps
(5) Top indicating mark
(A) Slide
EVERY 250 SERVICE HOURS
2. Remove the drain plug from the oil drain hose and
drain all oil.
3. Reinstall and tighten the drain plug.
4. Return the oil drain hose to the storage location.
5. Attach the under cover and re-tighten the bolts.
(1) Oil drain hose
6. Fill up with new oil through the filling port to the
specified level.
(1) Oil filling port
(2) Engine oil dipstick
SSV65
Engine oil volumes with
engine oil filter
SSV75
8. Replacing the engine oil filter
cartridge
1. Pull the lever and open the rear door.
(2) Drain plug
(A) Required oil level range
7.5 L
10.0 L
SSV65,SSV75