Adjusting The Engine Valve Clearance; Every 1500 Service Hours; Checking The Injector Tip; Replacing The Oil Separator Element - Kubota SSV65 Operator's Manual

EVERY 1000 SERVICE HOURS
Hydraulic oil
Normal work every 1000 Hrs.
20% every 800 Hrs.
Hammer
40% every 400 Hrs.
work por-
60% every 300 Hrs.
tion
more every 200 Hrs.
3. Adjusting the engine valve
clearance
Consult your local KUBOTA dealer for adjusting the
engine valve clearance.

EVERY 1500 SERVICE HOURS

Carry out all 50, 100, 250, and 500 hour servicing at
the same time.

1. Checking the injector tip

Consult your local KUBOTA dealer for checking the
injector tip.
2. Replacing the oil separator
element
WARNING
To avoid personal injury or death:
• Be sure to stop the engine before replacing the
oil-separator-element.
1. Remove the cover, and remove the oil-separator-
element.
2. Wipe off the oil and the carbon in the case with a
clean rag.
3. Fit a new oil-separator-element and new gasket.
4. Tighten the cover until a cover comes in contact
with body.
(1) Oil separator
SSV65,SSV75
Return filter Suction filter
every 500 Hrs.
(250 Hrs. after
first operation)
every 1000 Hrs.
every 300 Hrs.
every 100 Hrs.
(1) Body
(2) Oil separator element
(3) Gasket

3. Checking the EGR cooler

Consult your local KUBOTA dealer for checking the
EGR cooler.
4. Checking the PCV (positive
crankcase ventilation) valve
Consult your local KUBOTA dealer for checking the
PCV valve.

EVERY 2000 SERVICE HOURS

Carry out all 50, 100. 200, 250, 500, and 1000 hour
servicing at the same time.
1. Checking the alternator and the
starter motor
Consult your local KUBOTA dealer for checking the
alternator and the starter motor.

EVERY 3000 SERVICE HOURS

Carry out all 50, 100, 200, 250, 500, 1000, and 1500
hour servicing at the same time.

1. Checking the EGR system

Consult your local KUBOTA dealer for checking the
EGR system.

2. Checking the turbocharger

Consult your local KUBOTA dealer for checking the
turbocharger.
MAINTENANCE
(4) Cover
101