OPERATION OF THE MACHINE
(1) Left control lever (traveling
lever)
4.2 How to use spin turn
To spin the machine left
1. Tilt the left-control-lever (traveling lever) to the left.
(1) Left control lever (traveling
lever)
To spin the machine right
1. Tilt the left-control-lever (traveling lever) to the right.
(1) Left control lever (traveling
lever)
SSV65,SSV75
(A) Tilt
(B) Backward to the right
(A) Tilt
(B) Left
(A) Tilt
(B) Right
5. Operating the lift arms
WARNING
To avoid personal injury or death:
• Do not exceed the rated operating capacity of
the unit. If loads exceed the rated operating
capacity, the unit can experience a hydraulic
imbalance when half or medium "lift arms raise"
and "bucket roll back" or "auxiliary hydraulic
control" commands are input together, which
can result in the lift arms lowering slowly. If you
begin to experience a hydraulic imbalance,
either place the lift arms control in neutral or
input full raise control, and lift arms lowering
will cease.
To lower the lift arms
1. Push the right-control-lever (front-operating-lever)
forward.
(1) Right control lever (front op-
erating lever)
To raise the lift arms
1. Pull the right-control-lever (front-operating-lever)
backward.
(1) Right control lever (front op-
erating lever)
OPERATION
(A) Push
(B) Lower
(A) Push
(B) Lower
59