Towing An Operable Machine - Kubota SSV65 Operator's Manual

TRANSPORTING
10. Block the tires and tie down the machine using two
tie-downs at the front and two tie-downs at the rear.
(A) Front tie-down locations
(both sides)
(B) Rear tie-down locations
(1) Chain or strap
11. Depending on the attachment installed, the loader
arms may not come in contact with rest stop.
Therefore it may be necessary to use the alternate
front tie-down for securement of the machine. Use
two separate straps or chains as shown in the
following figure and secure the attachment with a
separate strap or chain. Consult your government
transportation laws and regulations.
72
(2) Blocks

TOWING AN OPERABLE MACHINE

(1) Chain or strap
12. When installing the chains or the strap from tie-
down location of the machine to tie-down points of
the truck or trailer, maintain proper angles to
provide lateral and downward securement.
13. When using alternate or standard tie-down points,
be sure to also tie-down the attachment in addition
to the machine.
TOWING AN OPERABLE
MACHINE
WARNING
To avoid personal injury or death:
• Tow only from both rear tie-downs as shown in
the figure.
• Towing is only allowed for a short distance at
walking speed.
• Use a tow chain or rope and hardware that is
rated at least 1.5 times the machine weight.
See the Technical data section in this operator's
manual to find machine weight.
• Do not tow the machine using the front tie-down
points of the attachment located on each side of
the lift arms or tie-down point of machine.
(See SPECIFICATION TABLE on page 25)
(A) Alternate front tie-down
SSV65,SSV75