Operation; Cab Type Machine; Interior Lamp; How To Use The Wiper/Washer Switch [Closed Cab Model] - Kubota SSV65 Operator's Manual

OPERATION

OPERATION

CAB TYPE MACHINE

1. Interior lamp

The interior-lamp-switch is operative when the starter
key is in the [RUN] position.
(1) Interior lamp switch
2. How to use the wiper/washer
switch [Closed cab model]
IMPORTANT :
• Do not activate the washer switch if the tank for
the cleaning fluid is empty because the pump
can be damaged.
• Do not activate the wiper switch if the window is
dry. In this case, make sure that the cleaning
fluid is applied to the pane before activating the
wiper.
• In freezing conditions, make sure that the wiper
blade is not frozen to the glass before
switching-on of the wiper switch. The motor can
be damaged if the wiper system is used under
freezing conditions.
NOTE :
• Wiper and washer are operable only during
engine operation.
Wiper switch
1. Move the wiper/washer switch to the wiper position
when the starter key is in [RUN] position.
The wiper starts.
2. Further push on the wiper/washer switch to the
wiper position when spraying the cleaning fluid.
The washer system will also be activated.
50
(2) Interior lamp
Washer switch
1. Move the wiper/washer switch to the washer
position.
The washer system sprays the cleaning fluid to the
pane.
(1) Wiper/washer switch
3. Opening and closing the cab door
[Closed cab model]
WARNING
To avoid personal injury or death:
• Keep hands and feet away from the area
between the cab door and the cab frame.
Otherwise the risks of serious injuries by
pinching or crushing to the operator increase.
• Other persons should stay away when opening
the cab door.
• Do not use the lock lever at the bottom of the
cab door from inside.
• Use caution and both hands to open/close the
cab door to avoid contact with your head.
CAB TYPE MACHINE
(A) Wiper
(B) Washer
SSV65,SSV75