Adjusting The Operator's Seat; How To Use The Seat Belt - Kubota SSV65 Operator's Manual

OPERATION
Make sure that all machine lights are working
properly.
• Before you start the engine and before you
move the machine, make sure that no one is
underneath, or on or close to the machine.

2.1 Adjusting the operator's seat

WARNING
To avoid personal injury or death:
• Replace the operator's seat with the new one if
it is damaged and got holes. Water or dust
could penetrate the hole and it causes the
erroneous OPC switch operation.
• Make sure that the seat is completely secured
after each adjustment.
(1) Backrest tilt adjust lever
(2) Travel adjust lever
(3) Weight adjust knob
(4) Ride indicator
Travel adjustment
1. Pull the travel-adjust-lever in the direction of unlock
(A) and slide the seat backward or forward, as
required.
The seat will lock in position when the lever is
released.
Weight adjustment
1. Turn the weight-adjust-knob
optimum suspension setting.
2. Make sure that the ride indicator shows green. If
red, readjust the suspension setting.
Tilt adjustment
1. Pull the backrest-tilt-adjust-lever in the direction of
unlock and move the backrest to the desired angle.

2.2 How to use the seat belt

WARNING
To avoid personal injury or death:
56
(A) Unlock
(B) To raise the seat
(C) To lower the seat
to achieve the
OPERATION OF THE MACHINE
• Always use the seat belt with a ROPS and FOPS
protection structure. Adjust the operator's seat
to the optimal position and buckle it up.
• Always fasten the seat belt securely before
starting the engine.
(1) Seat belt
(2) Socket
Fastening the seat belt
1. Pull the seat belt from the retractable (left) side of
the operator's seat.
2. Insert the fixture of the seat belt into the socket at
the left side of the operator's seat until the fixture
clicks deep into position.
Releasing the seat belt
1. Press the red button of the socket to release the
seat belt.
The seat belt reels itself and gets retracted to the
right side.
(3) Button
SSV65,SSV75