Discharging Mud From Operator Cab And Main Frame; Discharging Mud From The Operator Cab; Discharging Mud From The Main Frame - Kubota SSV65 Operator's Manual

MAINTENANCE
(1) Stopper lock
2. Support the cab
mechanism.
(1) Stopper
3. Lower the cab slowly all the way down.
4. Tighten the lock bolts with correct tightening torque.
(2) Lock bolt
Tightening torque
80

DISCHARGING MUD FROM OPERATOR CAB AND MAIN FRAME

(A) Release
and release the latching
(A) Release
77.5 N⋅m to 90.2 N⋅m
DISCHARGING MUD FROM
OPERATOR CAB AND MAIN
FRAME
1. Discharging mud from the
operator CAB
1. Remove the floor mud outlet.
2. Discharge mud on the floor through the hole.
(1) Floor mud outlet
2. Discharging mud from the main
frame
WARNING
To avoid personal injury or death:
• Before entering underneath the machine, check
your surroundings, ensure its safety and
remove the key.
• The plate on the bottom of the main frame may
get heavy with accumulated mud. In case plate
of the bottom of the main frame suddenly falls,
do not get under the plate and remove with
much care.
1. Tilt the cab.
2. Open the rear door.
(A) Remove
SSV65,SSV75