Operating The Control Panel - Kubota SSV65 Operator's Manual

OPERATING THE CONTROL PANEL

Blower switch
The air flow (fan speed) equips three levels. At the [3]
position, you can obtain the largest air flow.
1. Set the blower switch at the desired position to
obtain the desired air flow (fan speed).
OPERATING THE CONTROL
PANEL
(1) Air-conditioner switch with
indicator light
Heating air
1. Adjust the blower switch [1], [2], and [3] and the
temperature-control-dial to achieve the desired
temperature level.
NOTE :
• In summer, when the heater is not used, keep
the temperature-control-dial
(leftmost) position. Otherwise, hot air will raise
the temperature in the cab.
Dehumidifying-heating
1. Press and turn on the air-conditioner-switch.
2. Turn the blower switch on [1], [2], or [3].
3. Adjust the temperature-control-dial to the cool
(leftmost) or an intermediate position to achieve the
desired temperature level.
NOTE :
• Be sure to close the door while the air-
conditioner is on.
Cooling
1. Press and turn on the air-conditioner-switch.
2. Turn the blower switch on [1], [2], or [3].
3. Adjust the temperature-control-dial to the cool
(leftmost) or an intermediate position to achieve the
desired temperature level.
NOTE :
• Be sure to close the door while the air-
conditioner is on.
SSV65,SSV75
(2) Temperature control dial
(3) Blower switch
at the cool
Defrosting or demisting
To defrost or demist the windshield, take the following
steps.
1. Open the front-air-outlet and direct it to the
windshield.
2. Set the blower switch to the [3] position and set the
temperature-control-dial
position.
AIR CONDITIONER
to [warm] (rightmost)
49