Horn Switch; Travel Speed Switch; Working Light Switch - Kubota SSV65 Operator's Manual

SWITCHES
(1) Hydraulic unlock switch

4. Horn switch

When pressing the horn switch, the horn will beep.
The horn switch is operative even when the starter key
is in the [STOP] position.
(1) Horn switch

5. Travel speed switch

Travel speed will increase when you press down the
travel-speed-switch.
Switching the dual travel speed:
1. When pressing the travel-speed-switch, the buzzer
beeps twice, the travel speed changes from low to
high speed, and the
2. When pressing the travel-speed-switch again, the
buzzer beeps once, the travel speed changes from
high to low speed, and the
SSV65,SSV75
(2) Hydraulic lock indicator
symbol lights up.
symbol goes out.
INSTRUMENT PANEL AND SWITCH
(1) Travel speed switch
NOTE :
• When activating the travel-speed-switch, press
it completely. The
operative only when the travel system is
unlocked.
• Each time the travel-speed-switch is pressed,
the travel speed is switched between high and
low speed.
• If the hydraulic oil temperature is low, the travel
speed does not change to high speed.
(The amber master-warning-light blinks.)

6. Working light switch

The working-light-switch is operative with the starter
key in the [RUN] position.
The working-light-switch has 3 positions.
1. When the working-light-switch is positioned on
lower side, the working lights stay off.
2. When moving the working-light-switch to the middle
position, the front working light, the front corner
light, and the rear tail light turn on.
3. When moving the working-light-switch to the upper
side, the front working light, the front corner light,
the rear tail light, and the rear working light turn on.
(2) Speed indicator light
travel-speed-switch
35
is