Kubota SSV65 Operator's Manual page 48

SAFETY FEATURES
(1) Lift arm stopper
IMPORTANT :
• Make sure that the top of the lift-arm-
stopper fits the flat part of the lift arm and
that the bottom of lift-arm-stopper fits the
flat top of the arm-cylinder-rod. Do not allow
any gap in both locations top and bottom of
the lift-arm-stopper.
(1) Lift arm stopper
(2) Arm cylinder rod
12. Start the engine.
13. Set the parking brake switch to the parking position.
14. Slowly lower the lift arms against the lift-arm-
stopper.
Removing
1. Sit in the operator's seat with the seat belt fastened.
2. Start the engine.
3. Set the parking-brake-switch
position.
4. Slowly raise the lift arms to the maximum height.
5. Stop the engine.
6. Ask the second person to remove the lift-arm-
stopper.
7. Start the engine.
8. Lower the lift arms fully to the ground.
9. Stop the engine.
10. Return the lift-arm-stopper to the storage position
and secure with knob bolt.
11. Remove the jack stands.
44
(A) Fit
to the parking
SSV65,SSV75